厦装 XZ636/XZ636L 装载机参数配置

首页 >新机 >装载机新机 >厦装 XZ636/XZ636L 装载机
厦装 XZ636/XZ636L 装载机

厦装 XZ636/XZ636L 技术参数

主要外形尺寸  Dimensions
名  称(Description) 机  型(Model)
XZ636 XZ636L
车长(斗平放地面)  Overall length(bucket on the ground) 6775±30mm 7115±30mm
车宽(车轮外侧)  Overall width(outside of the wheels) 2250±20mm 2250±20mm
车高  Overall height 3185±20mm 3185±20mm
斗宽  Bucket width 2360±20mm 2360±20mm
轴距  Wheel base 2750±10mm 2750±10mm
轮距  Wheel track 1800±10mm 1800±10mm
最小离地间隙  Min. ground clearance  380±10mm  390±10mm
最大卸载高度  Max. dumping height 2875±20mm 3260±20mm
最大高度的卸载距离  Dumping distance at the highest position  975±15mm 1025±15mm
性能  Performance
标准斗容量  Standard bucket capacity 1.7m3 (装卸比重<1.4t/m3的轻散物料,可选配2.0m3加大斗)
整机质量  Operating weight 10.0±0.5t
额定载荷  Rated load 3.0t
爬坡度  Climbing gradient ≥28°
掘起力  Breakout force  ≥120.6kN
牵引力  Traction force ≥88.5kN
车速  Travel speed
前进  Forward Ⅰ档  Forward gear Ⅰ  7.6km/h
Ⅱ档  Forward gear Ⅱ 13.5km/h
Ⅲ档  Forward gear Ⅲ 25.0km/h
Ⅳ档  Forward gear Ⅳ 37.0km/h
后退  Reverse Ⅰ档  Reverse gear Ⅰ  9.5km/h
Ⅱ档  Reverse gear Ⅱ 30.0km/h
工作系统动作时间  Actuation time for working system
提升  Raise 卸载  Dump 下降(空斗)  Lower(empty bucket) 三项和  Total
5.6s 1.1s 3.1s 9.8s


XZ636/XZ636L  主要技术参数      XZ636/XZ636L  Main specifications
名  称(Description) 技术规格(Technical specifications)
发动机 Engine 型号  Model TD226B-6G(潍柴道依茨)
额定功率  Rated power 92kW
额定转速  Rated speed 2200r/min
最大扭矩  Max. torque 500N.m
总排气量  Total air displacement 6.234L
汽缸数-内径×行程  Number of cylinder-bore×stroke 6-?105×120
额定工况燃油消耗率  Rated fuel consumption rate 231g/(kw.h)
传动系统  Transmission system 液力变矩器 Hydraulic torque converter 形式  Type 单级三元件  Single-stage three-element
变矩系数 Torque coefficient Ko=3.6±0.2
冷却方式  Cooling method 油冷压力循环  Oil-cooling pressure circulation
进口油压  Inlet oil pressure 0.4-0.5MPa
变速箱  Gearbox 形式  Type 动力换档定轴式  Power shift fixed-spindle
驱动桥 Driving axle 主传动形式  Type of main transmission 螺旋伞齿轮一级减速 One-stage spiral bevel gear deceleration
减速比  Reduction ratio 5.285:1
轮边减速形式  Type of final drive 一级行星减速  One-stage planet gear deceleration
减速比  Reduction ratio 3.88:1
工作液压系统 Working hydraulic system 举升油缸数-内径×行程  Number of lift cylinder-bore×stroke 2-?110×780
转斗油缸数-内径×行程  Number of tilt cylinder-bore×stroke 1-?160×499
工作油泵/排量  Working oil pump/ Displacement CBGj2100 / 100ml/r
系统工作压力  Working pressure 15.6MPa
分配阀型号  Type of distribution valve DF25.2
转向系统 Steering system 形式  Type 铰接全液压转向 Articulated fully hydraulic steering
转向油缸数-内径×行程  Number of steering cylinder-bore×stroke 2-?80×294
转向泵/排量  Steering pump / Displacement CBN-E550 / 50ml/r
系统工作压力  Working pressure 9.8MPa
制动系统 Brake system 行车制动(脚制动)  Driving brake(Foot-brake) 气顶油盘式四轮制动 Air-pushing-oil disc brake on four wheels
停车制动(手制动)  Parking brake(Hand-brake) 操纵软轴钳盘式 Cable-controlled caliper disc brake
轮胎 Tyre 规格  Specification 17.5-25
轮胎气压  Tyre pressure    前轮:0.29MPa,后轮:0.27MPa              Front:0.29MPa,Rear:0.27MPa

 

大家都在看